BMW R100

NOW SOLD

This black edition R100 has unbelievable mirror like deep gloss black paintwork Ohlins suspension, bluetooth ignition, killer stance and so much more…

Where to start on this, the original bike started off as a lovely low milage r100 before being completely stripped of every nut and bolt.

The frame was then stripped back to bare metal, shaved of any unnecessary tabs and parts, battery tray rear exhaust and foot peg hangers etc.. then all smoothed out for an uncluttered look.

One of our hand made subframes was then fabricated and welded to the frame. After all fabrication was complete it was then professionally painted with several coats of beautiful deep gloss 2k black.

The Front Forks were stripped down, lowered and rebuilt with new springs seals , fluids and gators, then painted to match the frame.

The Swing arm and bevel gear stripped, and then taken back to bare metal and rebuilt with new gasket’s fluids, rubbers/stainless clips , filler and drain bolts then painted in the beautiful deep gloss black to match the frame and forks.

Wheels were stripped and rebuilt , powder coated gloss black then new Shinko old style tyres and tubes fitted and balanced.

The Engine and was completely stripped vapour blasted and then rebuilt and reconditioned ,new valves, gaskets and seals , stainless push rod tubes and fasteners used, airbox delete now housing a small lightweight hidden lithium Battery .

Gearbox completely stripped and reconditioned

Then all professionally painted Matte black.

New clutch kit fitted

Carbs stripped and sonically cleaned then rebuilt with new jets, diaphragms , o rings, gaskets

floats and springs.

Choke conversion.

New pod style air filters.

Custom made exhaust pipes, wrapped.

The Petrol tank was stripped back to bare metal then painted in the gorgeous deep Gloss black , this really is like a mirror. New badges , Billet alloy filler cap, new fuel taps lines and filters.

One off hand made seat finished in fluted black leather.

And a Custom made rear under tray finish off the rear end.

Reynolds custom motorcycles lightweight billet alloy top yoke now with the ability to drop the forks through for that angry stance .

New clip on handlebars with new grips

Upgraded Brembo master cylinder and levers.

New throttle control along with new throttle cables and clutch cable.

New red illuminated switch gear along with a fully digital speedo/rev counter completes the cockpit.

Lighting is taken care of with an LED front light and Kellerman Atto 3 in 1 tiny rear lights tapped into the rear subframe .

Motogadget m disc front indicators

Electrics are powered by a Motogadget M unit blue this basically turns everything from analogue to digital.

Keyless ignition , Downloadable App for your phone so you can then use your phone as an ignition key and also alter parameters on the bike like how the indicators flash, lighting operates etc.. set up service intervals. Activate the alarm immobiliser tracker and so on.

Complete new wiring loom.

Also a hidden rf ignition key supplied and fitted in case your phone is flat

New Ignition leads and plugs.

Brembo Brake callipers have been completely stripped and rebuilt with new seals and rubbers, new Venhiel braided Brake lines, Uprated Brembo floating brake discs.

Rear suspension is taken care of with a fully adjustable Ohlins rear shock with custom reservoir mount

Custom made rear numberplate hanger and light

Stainless mounting parts and fasteners used all round

1000s of hours labour is involved in building a showstopper like this, it rides and sounds as good as it looks.

Please do not confuse this bike with a generic e bay bolt together off the shelf badly fitted parts BMW cafe racer, we have been building customs for nearly 30 years and the last 13 solely on BMWs

The bike will come with 12 moths MOT for the new owner.

Private plate not included

Original plate included M reg April 1995

We have built bikes for people in several countries around the world and would suggest Shippio for worldwide shipping.